<font id="53h5b"><em id="53h5b"><meter id="53h5b"></meter></em></font>

    <font id="53h5b"><em id="53h5b"><meter id="53h5b"></meter></em></font>

      <font id="53h5b"></font>
      <menuitem id="53h5b"></menuitem>
        <menuitem id="53h5b"></menuitem>
        <menuitem id="53h5b"></menuitem>
        <font id="53h5b"><noframes id="53h5b"><dfn id="53h5b"></dfn>

        <menuitem id="53h5b"></menuitem>

          <font id="53h5b"></font>

          <font id="53h5b"><video id="53h5b"><meter id="53h5b"></meter></video></font>

                  <menuitem id="53h5b"></menuitem>

                  <font id="53h5b"></font><output id="53h5b"><noframes id="53h5b">
                    產品展示
                    PRODUCT DISPLAY
                    行業資訊您現在的位置:首頁 > 行業資訊 > 品達整車密封性淋雨試驗室簡介

                    品達整車密封性淋雨試驗室簡介

                  1. 發布日期:2018-01-13      瀏覽次數:788
                    • 整車密封性淋雨試驗室用途:

                      本防雨密封性試驗裝置要保證從各個方向對工件(客車、汽車、貨車等)噴水,避免出現噴水死角和降雨空白區域,并保證噴水壓力達到要求。通過試驗確保整機的防雨密封性能和質量。

                      試驗內容:車輛的前部、后部,左右兩部、頂部、底部淋雨試驗

                      符合QC/T476-2007標準

                      Bus Rainproof Sealing Test Chamber

                      USES:

                      This rain proof performance test device from all directions to ensure the workpiece (buses, cars, trucks, etc) water spray, avoid water spray blind Angle and rainfall blank area, and ensure the pressure of spray water to meet requirements. Through the test of the whole machine to ensure that the rain proof sealing performance and quality.

                      The test contents: the front of the vehicle, hind, about two, the top, bottom, water test.

                      Accord with QC/T476-2007 standard.

                       

                       

                      整車密封性淋雨試驗室主要參數/The main parameters:

                      工作室容積

                      Studio volume

                      10m3~600m3(22×5×5 m 長L×寬W×高H 

                      主要參數

                      main parameters

                      受雨部位:前圍上部降雨強度:12mm±1mm/min

                      by the rain parts:front upper rainfall intensity: 12mm±1mm/min

                      側面、頂部、后部、底部降雨強度:8mm±1mm /min

                      side,top,back,bottom,the rainfall intensity:8mm±1mm /min

                      標準噴嘴直徑/standard nozzle diameter

                      噴淋密度/spray density:550×550mm

                      供水壓力/water supply pressure:150±10KPa

                      噴淋裝置管徑:總管∮133、支管∮40

                      spray device pipe diameter:header pipe∮133、branch pipe∮40

                      淋雨室體

                      water spray room

                      內層高性能防腐不銹鋼板,中間聚胺脂,外層噴塑彩鋼板。設觀察窗

                      The inner high-performance anti-corrosion stainless steel plate, and the middle polyurethane, outer plastic spraying choi steel,set observation window.

                      室體采用通過式,前進后出式通過方式

                      Chamber used through the way, from the front in the back out.

                      照明日光燈,外加防潮玻璃罩

                      Lighting fluorescent lamp, plus moistureproof the glass.

                      排水:排水水路分別設在室體內部的兩側,成環形排到污水池。

                      Drainage: water drainage are located in both sides of the internal Chambers, a ring row to the sewage pool.

                      噴淋裝置

                      spray device

                      管道材料采用鍍鋅管材,控制閥門采用蝸輪蝶閥,吸水處設底閥。管路中設穩壓閥1組,穩壓閥前設有壓力表、流量計,噴淋管末端設有壓力表、流量計。保證設備正常運行。支管排列均勻,保證淋雨段內降雨均勻。

                      Pipe materials use galvanized steel tubes, control valve to use the worm gear butterfly valve, bibulous place set bottom valve. A line of voltage valve group 1 on the valve with pressure gauge, flowmeter before, spray pipe end with pressure gauge, flow. Ensure the normal operation of equipment. Pipe arrangement even, guarantee for rain in rainfall even.

                      自動補水系統設蝶閥一個,水力遙控浮球閥一個??勺詣涌刂蒲h水低水位,保持循環水池水位在一定水平。水位超高報警裝置。

                      Automatic filling water system set a butterfly valve, hydraulic remote control ball float valve is a. Can automatic control circulating water low water level, keep circulating water pools in a certain level. High water level alarm device.

                      噴嘴:采用進口噴嘴,噴嘴性能符合QC/T476-2007要求.。噴嘴噴射狀態為實心錐狀水柱,噴嘴均勻布置,不存在死區。

                      The nozzle: imported nozzle, nozzle with performance QC/T476-2007 requirements. The nozzle jet status to solid cone water column, nozzle even decorate, does not exist dead zone.

                      水泵:采用低噪音臥式水泵,噪音≤85分貝。壓力表置于水泵出口處。

                      Pump: horizontal pump with low noise, the noise than 85 decibels. Pressure gauge on water pump the exit.

                      前后部位的噴淋采用可門式噴淋架,偏于車輛進出。

                      Before and after the spray parts of the door type spray frame, leaned in and out of the vehicle.